实验设备共享项目孵化创新支持计划 新希望大爱无疆寻找足迹国产电炉

欢迎进入洛阳赛特瑞智能装备有限公司官网!让科技更有温度!

洛阳赛特瑞智能装备有限公司

赛特瑞• 智能实验装备供应商 集研发设计、销售、售后维保专业服务商

联系电话:

高温电炉系列-高温马弗炉厂家-洛阳赛特瑞高温实验炉

1200℃ dual zone tube furnaces

来源:高温马弗炉 | 发布日期:2022-09-08

The 1200℃ double temperature zone tubular furnace is a small tubular resistance furnace for laboratory use

1200℃ dual zone tube furnaces use the famous coil wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller with +/-1 °C accuracy and 40 programmable segments. Furnace housing is built with double-layer steel and two cooling fans inside keep the furnace body temperature low. Furnace tube is sealed by stainless steel vacuum sealing flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

These furnaces have built-in interface to a computer. We provide connection cable, adaptor and software that can be used to control the temperature and parameters of the furnace, all from your PC! You can also save a temperature curve for record or study purposes.

Safety features

1、Furnace overheat protection cuts off power when temperature is over the desired range.
2、Thermocouple protection cuts off power when the thermocouple is broken or malfunctioned.
3、Temperature variation protection cuts off power when the difference between actual temperature and target temperature is off the desired range. (refer to controller’s manual)
4、Power failure protection resume furnace operation right after the point of failure when power is back up.
5、Stainless steel flange support makes sure the tube and flanges are secure and in their absolute position, it also longer the life of the tube

6、Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

Specifications:

Name 1200℃ dual zone tube furnace
Electrical requirements 208-240V, single phase, 50/60 Hz
Tube material High purity quartz
Min. working temperature Ambient
Max. working temperature Zone1/Zone2: 1200°C
Max. constant working temperature Zone1/Zone2: 1100°C
Constant working temperature under vacuum 1000°C
Rated vacuum pressure
0.001 Pa / 0.0075 millitorr / 0.00001 mbar
Rated positive pressure 0.02 MPa / 150 torr / 3 psi
Refractory lining Mitsubishi (Japan) high quality 1500 grade fiber alumina
Heating element type Zone1/Zone2: Kanthal (Sweden) A1 2.0 coil wire
Thermocouple type Zone1/Zone2: K
Temperature controller Shimaden fp93 (Japan) with 4 patterns and
40 segments (i.e. 4 x 10 segments or 2 x 20 segments)
Max/recommended heating rate 20°C/min 10°C/min
Heating zone length Zone1: 8 inches Zone2: 8 inches
Constant temp zone length Zone1: 4 inches Zone2: 4 inches
Temperature controller precision +/- 1°C
Vacuum level (cold) 0.1 Pa
Vacuum sealing flange kit Stainless steel vacuum sealing flanges with one vacuum gauge,
two valves and four thermal ceramic blocks.
Compliant ETL tested to UL and CSA standards (optional), CE
Download Product brochure


Size comparison


Tube size (OD x length) 60mm x 1m 100mm x 1m 150mm x 1m
Maximum output 3 kW 4 kW 5.5 kW
Furnace dimensions (LxWxH) 24x16x23″ 25x16x24″ 26x18x26″

How to Program Across International Furnaces

【本文标签】

【本文地址】

高温箱管混合炉 1400度箱式炉 气氛箱式炉 氢气管式炉

免责声明:内容专业性较强,仅供参考学习,请勿直接采用。本站部分图片和文字来源于网络收集整理,仅供学习交流,版权归原作者所有,并不代表我站观点。本站将不承担任何法律责任,如果有侵犯到您的权利,请及时联系我们删除。

最新资讯